|
Docu-menta >
Tecnología >
Artículos de Tecnología >
Por favor, use este identificador para citar o enlazar este ítem:
http://documenta.ciemat.es/handle/123456789/2576
|
| Título : | Magnetic and Mechanical Design of a 16 T Common Coil Dipole for FCC |
| Autor : | Toral, Fernando
Munilla, Javier
Salmi, Tiina |
| Palabras clave : | Accelerator magnet
Superconducting magnet
Common coil
Mechanical design
Magnetic design |
| Fecha de publicación : | 25-ene-2018 |
| Editorial : | IEEE |
| Citación : | F. Toral, J. Munilla and T. Salmi, "Magnetic and Mechanical Design of a 16 T Common Coil Dipole for an FCC," in IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1-5, April 2018, Art no. 4004305, doi: 10.1109/TASC.2018.2797909 |
| Citación : | IEEE Transactions on Applied Superconductivity;Vol. 28, no. 3, pp. 1-5, Art no. 4004305 |
| Resumen : | A EuroCirCol is a conceptual design study for a post-LHC research infrastructure based on an energy-frontier 100 TeV circular hadron collider. In the frame of the high-field accelerator magnet design work package of this study, the feasibility of a 16 T dipole in a common coil configuration is being studied. This paper shows the electromagnetic design optimization performed to achieve the required field quality while minimizing the superconductor volume and taking into account the input parameters and assumptions of the EuroCirCol study. The finite element models have been used to analyze the stress distribution and deformations under the large Lorentz forces due to the very high magnetic field. Several iterations have been necessary to obtain a feasible magnet design. The 3-D electromagnetic calculations are also included in this paper. |
| URI : | http://documenta.ciemat.es/handle/123456789/2576 |
| ISSN : | 1558-2515 |
| Aparece en las colecciones: | Artículos de Tecnología
|
Los ítems de Docu-menta están protegidos por una Licencia Creative Commons, con derechos reservados. 
|
